Distilling Apparatus

• Ideal for determination nitrogen in organic compounds
• Digestion and distillation stage can be performed in this apparatus
• the inlet tube allows permanganate solution to be introduced after distillation

• Ideal batch production of high purity distilled water
• general purpose batch Distillation assembly equipped with an interchangeable stoppered neck that facilitates addition
• The flask has a flat base with a delivery tube on the side

• Ideal batch production of high purity distilled water
• general purpose batch Distillation assembly equipped with an interchangeable stoppered neck that facilitates addition
• The flask has a flat base with a delivery tube on the side
• Comes with Friedrich’s spiral Condenser for higher distillation rates

• Ideal for determination nitrogen in organic compounds
• Digestion and distillation stage can be performed in this apparatus
• the inlet tube allows permanganate solution to be introduced after distillation

• This apparatus is ideal for estimation of volatile oil that is heavier than water
• Comes with a 5 ml Receiver with stopcock an separator Tube a condenser and 1000 ml flask

3451- Essential Oil Determination Apparatus (Clevenger Apparatus) For Oil Lighter Than Water

• Ideal for estimation of volatile oil that is lighter than water
• Comes with a 5 ml Receiver with stopcock an Oil Separator Tube, a condenser and 1000 ml flask

• Ideal for distilling alcohol in the laboratory to produce the purest grade
• Thorpe’s revenue still for purification of ethyl alcohol popularly used in pharmaceutical industries

3454 – R M Value apparatus

• Ideal for use in dairy industries
• facilitates the determination of butter fat and the analysis of oil Fat and waxes

*As per IS 548 Part I Standard

• Made of 3.3 borosilicate glass Uniform wall distribution of the flask makes it suitable for heating
• Consists of graduated 10 ml receiver with 0.1 intervals

Consists of receiver 10 ml Graduated with 19 / 26 outer joint and 24 / 29 inner joint round bottom flask 1000 ml with 24 / 29 outer joint and Liebing condenser 200mm with 19/26 joint .The ml receiver is graduated from 1 ml to 10 ml in 0.1 ml intervals.